Xms-1024 installation, 2 desktop setup, User guide – Luxul XMS-1024 User Manual
Page 10: Avoid placement in direct sunlight
User Guide
10
© Copyright 2014 Luxul. All rights reserved. Trademarks & Registered Trademarks are property of respective holders.
Check the power cord to confi rm a secure connection.
Avoid placement in direct sunlight.
When installing the XMS-1024 on a fl at surface, attach the rubber feet to the
bottom of the device to avoid scratching the surface.
4: XMS-1024 INSTALLATION
4.1 Installing the XMS-1024 in a Rack
The XMS-1024 can easily be installed in a standard 19” rack. The XMS-1024 includes two
mounting ears for installing and stabilizing the switch. For attaching the mounting ears
and installing the switch within a rack, please refer to the following illustration:
Rack-Mounting the XMS-1024
Using the included screws, attach the mounting ears to each side of the switch.
Mount the switch in the rack with the LEDs facing outwards. Be sure the switch is
level and properly secured within the rack.
4.2 Desktop Setup
For use as a desktop device, position and apply the included rubber feet to the
bottom of the XMS-1024.