Luxul XMS-1024 - Manual (Page 9)

luxul.com | 14203 Minuteman Dr | Suite 201 | Draper, UT 84020 | p: 801-822-5450 | f: 801-822-5460
User Guide
9
At startup, port LEDs will fl ash for 1 second as a self test.
When an SFP optical interface is in use, the 1000 Mbps LED and the Link/Activity
LED of the corresponding Ethernet port are both on to indicate the SFP status.
2.3 Rear Panel
100-240V~ 0.6A(M
ax) 50/60H
z
XMS-1024 Rear Panel View
Power Input: Please use the included power cable
3. PREPARING FOR INSTALLATION
3.1 System Requirements

Ethernet Cables to connect the XMS-1024 to Ethernet enabled devices

Computer equipped with a Web browser. Supported Web browser versions
include Microsoft IE 6.0 and up, Safari 1.0 and up or Mozilla Firefox 1.0 and up.
The Web browser is used to confi gure the XMS-1024.

Power must be AC 100-240V~ 0.6A(Max) 50/60Hz.
3.2 Before Connecting to the Network
The XMS-1024 can be rack-mounted or used as a desktop switch. Before connect-
ing to the network, please be aware of the following requirements:

Install the XMS-1024 in a stable/safe place to avoid any possible damage

Make sure there is adequate space around the XMS-1024 for adequate ventila-
tion and proper heat dissipation. It is recommended to have at least 4-6 inches
around all sides.

Do not place heavy articles on the XMS-1024.

Power outlets should be within 5 feet of the XMS-1024.

Verify the ground connection of the outlet is functioning properly.