Luxul XMS-1024 - Manual (Page 24)

User Guide
24 © Copyright 2014 Luxul. All rights reserved. Trademarks & Registered Trademarks are property of respective holders.
NOTE: Applications like Video Streaming and VoIP will work best with
high priority

802.1P Tag Priority: Enables or disables 802.1P priority functions

ToS priority: Enables or disables ToS priority functions

QoS Status Table: Displays the QoS status of all ports
5.8 MAC Settings

5.8.1 MAC Filter

5.8.2 Static MAC
5.8.1 MAC Filter

MAC Filter: This allows a MAC address to be added to a list that blocks that
particular address from connecting to the network. When the specifi ed MAC
address tries to connect on any port of the XMS-1024, network communication
will be blocked.

MAC Address: Enter the MAC address to be fi ltered
NOTE: Any MAC address that has been added to the MAC fi lter will not
be allowed to pass any traffi c until it is removed from the list

MAC Filter Table: Lists the MAC addresses to be fi ltered, as shown below. To
remove A MAC address from the fi lter table and allow access to the network,
click “Delete” on the right column next to the corresponding MAC address.