Luxul XMS-1024 - Manual (Page 7)

luxul.com | 14203 Minuteman Dr | Suite 201 | Draper, UT 84020 | p: 801-822-5450 | f: 801-822-5460
User Guide
7

XMS-1024 Gigabit Ethernet Smart Switch

Power Cord

Two L-shaped rack mounting brackets and screws

Four rubber pads

Quick Installation Guide
If any of the listed items are missing or damaged, please contact the reseller from
whom you purchased for return/replacement.
2: HARDWARE DESCRIPTION
2.1 Front Panel
The front panel of the XMS-1024 switch includes 24 1000Mbps RJ45 and 2 SFP ex-
pansion ports on the right side and LED indicators on the left side. Each 1000Mbps
port has one Link/Activity LED and one 1000Mbps LED, there are also two SFP
LEDs, one Power LED, one System LED and a factory reset button.
XMS-1024 Front Panel View

Factory Reset Button: Used to restore factory default settings.

To reset to factory defaults, press and hold the reset button until the SYS
LED turns off, approx. 5 seconds. A factory reset may take approximately a min-
ute to complete. A successful Factory Reset is indicated by the Port LED lights
scrolling once from left to right. When the SYS LED turns on the unit is ready.
NOTE: To hard reset the router use the power switch. Turn the router
off, wait 5 seconds and turn the unit back on.
CAUTION: Resetting the XMS-1024 to factory defaults will remove all
custom settings.