MOCET IP3062 - Manual (Page 16)

Page 16
MOCET IP3062 Professional IP Phone User Guide
1.5. IP3062 Port Functions
The back side view and the connectors of the IP3062 are as follows:
No Part Name Description
1 Handset Connector RJ-9 jack for connecting handset cord.
2 Headset Connector RJ-9 jack for connecting headset cord.
3 LAN Port
RJ-45 Jack 100/10Mbps Ethernet port for connecting to the
local area network (LAN). This port can support power over
Ethernet (PoE) if the LAN switch provides it.
4 PC Port
RJ-45 Jack 100/10Mbps Ethernet port for connecting to a
computer.
5 Power Jack
If an external power source is required, the adaptor is plugged
in here. Please use the power adaptor supplied in the package.
6 EDM Port
SATA interface for attaching the Extended Dial Module (EDM)
accessory. Up to two EDM units can be supported on the
IP3062.
7 USB Type A Port
USB 2.0 port with 5V/500mA power limitation (Can be used to
connect supported accessories including Wi-Fi adapters,
keyboards and memory devices.).
8 USB Mini b Port
USB 2.0 port with 5V/200mA power limitation (Can be used to
connect supported accessories including Wi-Fi adapters,
keyboards and memory devices.).
Their locations are shown in the figure below:
7
8
6
2 1 3 4 5