Muting and un-muting a call, Redialing a number, Setting up a conference call – MOCET IP3062 User Manual
Page 35: Transferring a call
Page 35
MOCET IP3062 Professional IP Phone User Guide
3.13. Muting and Un-muting a Call
While in a conversation, you may mute the microphone by pressing the MUTE (
)
button. The LED of the button will become blue. When muted, the other caller will not hear
anything from your phone.
Pressing the MUTE (
) key again will Un-mute the phone.
3.14. Redialing a Number
To redial the last numbers you dialed:
1. Press Redial(
) hot key.
2. Phone will enter “Dialed Record” list.
3. Select the number you want to redial.
4. Press “Dial” soft-key to dial out.
For more information, please see 2.4. Managing Call Logs.
3.15. Setting up a Conference Call
The IP3062 can support a 5-party conference call .
To set up a conference:
1. Call the first party and Hold the call.
2. Press “NewCl” soft-key to call another party
3. Press the Conference (
) hot key to set up a 3-party conference call.
Note, here is a 3-party conference call, if you want to set up a 4-party or a 5-party
conference call, repeat Step2 to dial third or fourth call, and then do Step3.
3.16. Transferring a Call
A call can be transferred in one of three ways:
Blind Transfer: The call is automatically transferred after you dial the number of the party
to whom you want to transfer the call.
Semi-Attended transfer: The party to whom you want to transfer the call does not answer
their phone before you transfer the call (when you hear ring-back tone).
Attended transfer: The party to whom you want to transfer the call answers their phone
before you transfer the call. You can consult with them before completing the transfer.