MOCET IP3062 - Manual (Page 40)

Page 40
MOCET IP3062 Professional IP Phone User Guide
4. Using Advanced Features
The Getting Started chapter describes the steps used to customize the IP3062 from the
LCD menu of the phone. However, there are many advanced features that need to be
configured using the phone’s web user interface. This chapter provides instructions on
how to use these features.
4.1. Login Web UI
To use your web browser to configure the IP3062, you need to know the IP address of the
phone on your local area network (LAN). Using the LCD menu, find the IP address of the
phone under Menu > Information > IP Address.
1. Point your web browser to the IP address of the IP3062.
Enter the correct Username and Password information into the dialog box and press OK.
Note: The default Username is “user” and the default Password is “1111” and the default
network settings are:
Default IP address:
192.168.1.10
Default Subnet mask: 255.255.255.0
Default Gateway:
192.168.1.1
Default DNS: 8.8.8.8
4.2. Changing the User’s Password
Some features of the IP3062 require you to enter a personal identification number (PIN)
for security. The default PIN of the IP3062 User account is “1111”.
To change the User password:
1. Navigate to the System tab.
2. Locate User Settings > User Password:.
3. Change the password to use a new PIN.