MOCET IP3062 - Manual (Page 37)

Page 37
MOCET IP3062 Professional IP Phone User Guide
Your voicemail is saved on either your hosted SIP service or on the IP PBX, but you can
access it from the IP3062 using the Message key.
The presence of new voice mail messages is indicated by a flashing message waiting
indicator (MWI) LED on the front of the phone and an icon is shown on LCD.
Note: Voicemail is an optional feature configured on a hosted SIP service or IP PBX and
may not be supported on your particular system. To use voicemail on the IP3062, some
settings need to be configured first. For more information please contact your administrator
or Service Provider support center.
To listen your voice messages:
1. Press the Message ( ) hot key to display the mailbox list.
2. Select which SIP line’s mailbox you want to listen to and press “OK”.
3. A call will be placed to your voice mail server.
4. Follow the interactive voice response (IVR) instructions to retrieve and listen,
forward or delete your messages.
3.19. Placing a Speed Dial Call
To configure a speed dial number, please see 2.2.6 Speed Dialing Setting.
To make a speed dial call:
1. Pickup the handset, or press a line key, or press the speaker key or press the headset
key.
2. When you hear dial tone, dial the one digit (0-9) speed dial key you previously
configured.
3. Press “OK” or the “Dial” soft-key and the phone will look up the key in the speed dial
table, find the matching item and dial the number assigned to the speed dial key.
3.20. Using Multiple Lines
IP3062 can support up to four lines configured for the same or different service providers
or servers. It allows you to make up to four concurrent calls.
For example, the following screen shows you line1001 has one active call with
number2001.