MOCET IP3062 - Manual (Page 47)

Page 47
MOCET IP3062 Professional IP Phone User Guide
5. Using Advanced Call Features
5.1. Centralized Conferencing (for Broadsoft PBX)
The IP3062 allows you to create multiple conferences with unlimited participants
(depending on service or IP PBX limitations) when your Administrator enables Centralized
Conferencing.
The steps to make centralized conferencing available are different for each supported IP
PBX or hosted SIP service. On a Broadsoft softswitch, you can initiate a Server-based
conference by pressing “Conf” soft key on LCD.
Note: the “Conf ” soft-key will show only you have set the “Conference Number” on SIP
Web page.
To create a Conference:
1. Place some calls with the participants.
2. Press “NewCal” to enter dial screen, and a “Conf” soft-key will show up.
3. Press “Conf” soft-key and a conference will be created.
4. All participants are added to the conference automatically.
To add new participant to the conference:
1. Press “NewCal”, and dial the participant you want to add.
2. There will be a “Conf” soft-key when the call is answered by the other participant.
3. Press the “Conf” soft-key and the new participant will be added to the conference.
5.2. Call Waiting
The call waiting feature notifies the user on an active call of a new incoming call. You can
disable the call waiting feature, so that the new incoming call is automatically rejected by
the phone with a busy message.
If you disable call waiting on the phone, and the user is on a call, any further incoming
calls receive busy unless “Call Forward Busy” is configured on the phone, where it then
forwards the call according to the configured destination.
5.3. Intercom Call
5.3.1. Answering an Intercom Call
By default, the IP phone allows incoming intercom calls to be automatically answered on
your phone. If the intercom call comes into the phone while an active call is already
present, the phone puts the active call on hold and answers the intercom call.
5.3.2. Placing an Intercom Call
The Intercom call feature depends on PBX/SIP Server as there are different intercom call
codes for each servers; for example, the Asterisk default intercom code is “*80”.