MOCET IP3062 - Manual (Page 23)

Page 23
MOCET IP3062 Professional IP Phone User Guide
To lock your phone:
1. Press “Menu”.
2. Select Phone Setting > Phone Lock.
3. Press the Navigation Up and Down keys to select On or Off.
4. Press Navigation OK key to confirm the change and exit the menu.
5. You will see your phone is locked.
Following is a locked phone screen.
2.2.6. Speed Dialing Setting
The Speed Dialing feature let you store up to 10 phone numbers that you can access
easily using a single digit Speed Dial number from 0 to 9.
To configure a speed dial number:
1. Press the “Spd” sofk-key below the LCD screen, or Press Menu > Phone Setting
> Speed Dialing.
2. Select the speed dial number to configure (from 0 to 9). And press the Navigation
OK or “Edit” soft-key to edit the setting, and enter the phone number.
3. Press the Navigation OK key to confirm the changes and exit the menu.
2.2.7. Reboot Your phone
Sometimes you will need to reboot your phone to apply new settings.
To reboot your phone:
1. Press “Menu”.
2. Use the Navigation Up and Down keys to select Reboot.
3. Press Navigation OK to reboot your phone. Phone will show a “Reboot” message
and the phone will restart.
Note: the IP3062 takes about 2 minutes to startup after rebooting; there will be a series of
diagnostic lights on the phone during the process. If your phone does not become
operational within 2 minutes, contact your administrator or Service Provider support line.
2.3. Managing Contacts
The IP3062 supports four different contact lists:
 All Contacts