Rocktron Xpression - Manual (Page 57)

MIDI Dump/Load
Any or all of the Xpression presets may be dumped to a sequencer or another Xpression via system
exclusive messages. The information exchanged when performing a MIDI Dump consists of parameter
values, title characters and controller assignment information. When dumping a single preset into an-
other Xpression, the dumped preset may be loaded into any preset location on the receiving Xpression.
To dump a single Xpression preset into another Xpression
Operating the Xpression
Connect a standard MIDI cable from the MIDI OUT of the transmitting Xpression to the
MIDI IN on the receiving Xpression. Step 1
IMPORTANT: Do not allow a looping connection from the MIDI OUT/THRU of the receiving Xpression
back to the MIDI IN of the transmitting Xpression.
Step 2 Turn the FUNCTION SELECT controls on both the transmitting and receiving Xpressions
until "MIDI DUMP/LOAD" is displayed on each.
MIDI DUMP/LOAD MIDI DUMP/LOAD
Step 3 Turn the PARAMETER SELECT control on each unit one step clockwise to "PR DUMP/
LOAD".
1 PR DUMP/LOAD 1 PR DUMP/LOAD
RECEIVING Xpression
RECEIVING Xpression
TRANSMITTING Xpression
TRANSMITTING Xpression
54