Rocktron Xpression User Manual
Page 58
Operating the Xpression
Step 4
Turn the PRESET control on the transmitting Xpression to the preset that is to be dumped into
the receiving Xpression. As the PRESET control is turned, the preset number will be dis-
played in the first three characters of the display.
32 PR DUMP/LOAD
Step 5
Use the PRESET control on the receiving Xpression to select the preset location to store the
received preset. (The preset currently stored at the selected location will be lost when the new
preset is received, therefore caution should be used when selecting a preset location.)
122 PR DUMP/LOAD
Step 6
To initiate the dump, press the STORE button on the transmitting Xpression. The transmitting
Xpression will display the preset number being dumped and "DUMPED". The receiving
Xpression will display the preset location being stored to and "RECEIVING..." while it
receives and stores the preset parameters and title.
122 RECEIVING...
32 DUMPED
After all the information for the dumped preset is stored, the receiving Xpression will display
"LOADED". The receiving Xpression also recalls the loaded preset at this time so that it may
be verified.
122 LOADED
Note:
If there is an error in transmission, the unit will display "RECEIVE ERROR". Should
this occur, check connections and try again. If other errors occur, check the Error
Messages chart in the Appendix.
RECEIVING XPRESSION
TRANSMITTING XPRESSION
RECEIVING XPRESSION
TRANSMITTING XPRESSION
RECEIVING XPRESSION
55