Rocktron MIDI Raider - Manual (Page 17)

14
SETUP, Page 3 of 10 - Bank Style
The third page of the seTUP program, Bank Style, determines how the next
preset will be recalled when the MIDI raider is banked up or down. If the
Bank Style parameter is set to “First”, the first preset in the new bank will
be recalled when the unit is banked up or down. If set to “Curnt”, the current
preset switch from the previous bank will be recalled. When set to “none”, an
additional preset switch must be pressed after banking up or down to recall the
desired preset.
FIrsT - recalls the first preset in the bank;
CUrnT - recalls the preset based on the last preset switch pressed;
nOne - recalls a preset when a preset switch is pressed
To select the Bank Style:
() With the 2nD l.e.D. still lit, press the "" switch to access the next
page of the seTUP program, Bank Style. (If the MIDI raider is not al-
ready in seTUP mode, press “2nD”, then “seTUP”, followed by “"
two times.)
() To select a different Bank style, press the "InC" or "DeC" switch di-
rectly below the currently selected style to scroll through the available
options.