Rocktron MIDI Raider - Manual (Page 53)

50
COPY, Page 4 of 4 - Set Copy
The fourth page of the COPY program, Set Copy, allows for an entire
set to be copied from one set location to another. set Copy copies all
of the songs and their order of an entire set (50 songs).
To copy a set to another set location:
() With the 2nD l.e.D. still lit, press the "" switch to access
the next page of the copy program, Set Copy. (If the MIDI
raider is not already in the COPY editing mode, press “2nD”,
then “COPY”, followed by “" three times.)
() Use the "InC" and "DeC" switches directly below the dis-
played set to be copied to select the desired set.
() Use the "InC" and "DeC" switches directly below the dis-
played set destination to select the desired set location to copy
to.
() Press the "CTr sTOre" button to initiate the copy. "COPY-
InG" will be displayed momentarily before returning to the set
Copy screen.
Tip:
If only a few changes need
to be made to an existing set
to create a new set, copy the
existing set and make the
changes to the new set . This
will be much quicker and
easier than creating an entirely
new set.