Rocktron MIDI Raider - Manual (Page 47)

44
COPY
The COPY program allows for presets, banks, songs and sets to be
copied from one location to another.
COPY, Page 1 of 4 - Preset Copy
The first page of the COPY program, Preset Copy, allows for a single
preset to be copied from one preset location to another.
Preset copy copies the following information:
Preset Title;
Programmable Patch Changes;
Per Preset Control Information;
Instant Access Switch Status;;
Custom MIDI Strings; and
System Exclusive Information
() To access COPY, press the "2nD" button to activate the sec-
ondary button functions.
() Press the "COPY" button. The l.e.D. above the "COPY" but-
ton will flash and the MIDI Raider will display the first page of
the COPY program. Pressing the "" button while in the 2nD
mode accesses each successive page.
To copy a preset to another preset location:
() Use the "InC" and "DeC" switches directly below the dis-
played preset to be copied to select the desired preset.
() Use the "InC" and "DeC" switches directly below the dis-
played preset destination to select the desired preset location to
copy to.
() Press the "CTr sTOre" button to initiate the copy. "COPY-
InG" is momentarily displayed before returning to the Preset
Copy screen.