Rocktron MIDI Raider - Manual (Page 73)

70
SYSX, Page 3 of 3 - Byte Value Assignment
The third page of the sYsX program allows for the assignment of byte
values for each byte of the system exclusive message.
() With the 2nD l.e.D. still lit, press the "" button to access
the third page of the sYsX program. (If the MIDI raider is not
already in the sYsX editing mode, press "2nD", then "sYsX",
followed by "" two times.)
To assign values to the MIDI string bytes:
() Use the “InC” and “DeC” switches directly below the currently
displayed byte number to select the desired byte to assign a byte
value to.
() Use the "InC" and "DeC" switches directly below the current
byte value displayed to select the value to assign to the displayed
byte number.
() An “EOX” (End of Exclusive) value ends the MIDI string and
does not allow any following bytes to be programmed.