Rocktron MIDI Raider - Manual (Page 27)

24
SETUP, Page 8 of 10 - Preset Reinitialization
The eighth page of the seTUP program, Preset Reinitialization,
allows for the restoration of an individual preset to its original factory
settings. This procedure will erase any modifications that the user has
made to a specific preset and return it to its original condition.
To reinitialize an individual preset:
() With the 2nD l.e.D. still lit, press the "" switch to access
the eighth page of the seTUP program. (If the MIDI raider is
not already in seTUP mode, press "2nD", then "seTUP", fol-
lowed by "" seven times.)
() To select the preset to be reinitialized, use the "InC" and
"DeC" switches directly below the preset currently displayed.
Pressing the STORE switch at this time will erase the cur-
rent settings for the displayed preset and return them to their
original condition as shipped from the factory. All erased
data will be unrecoverable.
() Once the desired preset is selected, press the "sTOre" switch
to reinitialize the selected preset.
!
!
WARNING!
The Preset Reinitialization
feature will erase all data for
the selected preset and return
it to its original condition as
shipped from the factory.
Once the STORE switch is
pressed, all erased data will be
unrecoverable!