Rocktron Intellifex LTD - Manual (Page 10)

7
(9) MIDI OUT/THRU jack:
This standard 5-pin DIN connector passes on the MIDI information that is received
at the MIDI IN jack to other MlDI-compatible devices via a MIDI cable. It also
outputs MIDI data when performing a memory dump.
Note: Inherently in MIDI there is a limit to the number of devices which can be
chained together (series connected). With more than three devices, a slight
distortion of the MIDI signal can occur (due to signal degradation) which can cause
an error in MIDI signal transmission. Should this problem arise, a MIDI box can be
used which connects directly to the MIDI device which transmits MIDI information
and has multiple connectors for the multiple devices receiving MIDI. MIDI cables
should not exceed 50 feet (15 meters) in length.
(10) POWER jack:
This jack accepts power from the 9VAC/1500mA adaptor supplied with the unit.
For more information on the power supply see the POWER REQUIREMENTS
section on page 2.