Rocktron Intellifex LTD - Manual (Page 6)

3
3. Front Panel
Some of the controls on the Intellifex ® LTD front panel have more than one function,
dependent upon what mode the unit is currently operating in. Please read this section to
become better aquainted with these functions.
(1) POWER switch
(2) RECALL button:
This button is used to recall the displayed preset.
(3) PRESET control:
The function of this control is dependent on the CONFIG button (located to the right
of the PRESET control).
When the CONFIG LED is off, turning the PRESET control will cause the Intellifex
LTD to exit its current function. The PRESET control may then be used to scroll
through the successive factory and user presets and titles stored in its memory.
When the CONFIG LED is on, the PRESET control is again used to scroll through
the successive presets, but instead of displaying preset titles the Intellifex LTD will
display the effect configuration stored for each preset.
(4) CONFIG button:
The CONFIG button is used to toggle between displaying either the preset title or
the configuration of the currently displayed preset. The configuration display
indicates both which effects the displayed preset executes and the order in which
they are executed. The LED above the CONFIG button is lit when the configuration
is displayed.
(5) DISPLAY panel:
The DISPLAY panel consists of 16 characters. Each character consists of 14
segments.
(6) COMPARE button:
The COMPARE button may be used to compare a modified parameter value to its
stored value. (If comparing an altered value to the stored value and the stored value
is currently being viewed, turning a knob or pressing a button that changes the
parameter value displayed will cancel the previous modified value.)
3. Front Panel