Rocktron Intellifex LTD - Manual (Page 9)

6
4. Rear Panel
(1) RIGHT CHANNEL INPUT jack:
This standard 1/4" mono jack provides input to the right channel of the Intellifex
LTD. When using only one input (mono), this jack should be used.
(2) LEFT CHANNEL INPUT jack:
This standard 1/4" mono jack provides input to the left channel of the Intellifex
LTD. When using only one input, this jack should not be used.
(3) RIGHT CHANNEL OUTPUT jack:
This standard 1/4" mono jack provides an output for the right channel of the
Intellifex LTD. When using the unit in a mono application, either output jack may
be used.
(4) LEFT CHANNEL OUTPUT jack:
This standard 1/4" mono jack provides output for the left channel of the Intellifex
LTD. When using the unit in a mono application, either output jack may be used.
NOTE: When using a mono input (Right Channel INPUT jack) and a mono
output (either the Left or Right Channel OUTPUT jack), the left and right
effected signals will be summed at the single output.
(7) PHANTOM POWER jack:
This jack offers the ability to power the Rocktron MIDI Mate ™ Foot Controller from
a seven pin MIDI cable which connects from the MIDI Mate to the MIDI IN jack on
the rear panel of the Intellifex LTD, eliminating the need to find an AC outlet near
where the footpedal would be placed during a performance - or the need to run an
extension cord out to the MIDI Mate. Instead of inserting the adaptor into the MIDI
Mate
™ POWER jack, plug it into the PHANTOM POWER jack on the Intellifex
LTD. This will power the MIDI Mate ™ through pins 6 and 7 of the MIDI cable
connecting the two units. A 7-pin MIDI cable must be used and is available through
your Rocktron dealer.
(8) MIDI IN lack:
This 7-pin DIN connector receives MIDI information from the device which is
transmitting the MIDI commands for the Intellifex LTD to execute.
4. Rear Panel