Rocktron Intellifex XL - Manual (Page 14)

11
EQ Function
The EQ function is available in all presets—regardless of the current configuration. The Intellifex XL provides four
bands of double-precision parametric EQ for all configuration types. Each band provides adjustable level, frequency and
bandwidth parameters.
EQ Parameters
Parameter Description
EQ I/O The EQ can be inserted or removed from the signal chain (IN or OUT).
BASS LVL The BASS LEVEL parameter can be used to cut or boost the low
frequencies by up to 15dB.
BASS FRQ The BASS FREQUENCY parameter specifies a center frequency
between 21Hz and 500Hz to be cut or boosted by the BASS LVL
parameter.
BASS BW The BASS BANDWIDTH parameter specifies (in octaves) the width of
the selected bass band.
LMID LVL The LOW MID LEVEL parameter can be used to cut or boost the low
mid-band frequencies by up to 15dB.
LMID FRQ The LOW MID FREQUENCY parameter specifies a center frequency
between 250Hz and 2kHz to be cut or boosted by the LMID LVL param-
eter.
LMID BW The LOW MID BANDWIDTH parameter specifies (in octaves) the width
of the selected low mid-band.
HMID LVL The HIGH MID LEVEL parameter can be used to cut or boost the high
mid-band frequencies by up to 15dB.
HMID FRQ The HIGH MID FREQUENCY parameter specifies a center frequency
between 1kHz and 8kHz to be cut or boosted by the HMID LVL param-
eter.
HMID BW The HIGH MID BANDWIDTH parameter specifies (in octaves) the width
of the selected high mid-band.
TREB LVL TheTREBLE LEVEL parameter can be used to cut or boost the high
frequencies by up to 15dB.
TREB FRQ The TREBLE FREQUENCY parameter specifies a center frequency
between 2kHz and 16kHz to be cut or boosted by the TREBLE LVL
parameter.
TREB BW The TREBLE BANDWIDTH parameter specifies (in octaves) the width
of the selected high band.