Rocktron Intellifex XL - Manual (Page 39)

36
B. Changing preset parameters
The parameter menu for each effect can be called up via the FUNCTION SELECT control.
Turn this control to the effect to be modified. Step 1
***** REVERB *****
Turn the PARAMETER SELECT control to choose which parameter to be altered for that
effect. Step 2
REV DECAY 59
Use the PARAMETER ADJUST control to modify the parameter value. The LED above
the STORE button will light, indicating that the preset has been altered from its original state. Step 3
REV DECAY 32
The COMPARE button may be used to compare the old parameter value to the new one. Step 4
REV DECAY 59
4 1 2 3