Rocktron Intellifex XL - Manual (Page 40)

37
C. Storing modified parameter values
To store altered parameter values, press the STORE button while the effect title or param-
eter is displayed to start the store procedure. The display will alternate between the preset
number/title that the changes will be stored to and: Step 1
Turn the PRESET control to select the desired preset number to store the new parameter
values into (if you wish to store the new parameter values into the current preset number,
this step is not necessary). User presets may be stored in preset numbers 1-80. Presets 81-
160 are factory presets and cannot be copied over. The display will now alternate between
the new preset number and: Step 2
Press the STORE button a second time to store the new values into the selected preset
number. The display will briefly flash "STORED" before displaying the new preset number
and title. Step 3
STORED
STORE TO PRESET
STORE TO PRESET
2 1,3,4
Altered preset parameters can only be stored in user preset numbers 1-80. Factory presets 81-160
cannot be copied over, and therefore cannot be selected as a destination for an altered preset. If a
factory preset (81-160) is altered and you wish to store it, the Intellifex XL will automatically
default to a user preset number exactly 80 less than the factory preset number selected when the
STORE button is pressed to initiate the store procedure (i.e. if preset 81 has been altered and you
attempt to store it at preset location 81, the Intellifex XL will default and store the altered param-
eters to preset 1, preset 125 will default to preset 45, etc.).
G
Note