Rocktron Intellifex XL User Manual
Page 19
16
PAN 1/2
This allows for the panning of each delay to the left or right output, if
desired. The Pan parameter is adjustable from 0 to 100 - where 0 = full
left, 100 = full right and 50 = center.
DLY TIME 1/2
These parameters determine the amount of time after a signal is input
that the delayed signal will begin to reproduce the input signal.
REGEN 1/2
This parameter is provided for each delay and determines the number of
times the delayed signal will repeat itself. This is achieved by feeding the
delayed output back into the input. Higher levels of regeneration will
result in more repeats.
D TYPE
The Delay Type parameter determines whether the Stereo, Ping-Pong
or 2-Tap delay type is currently active.
DL HF DAMP
Delay High Frequency Damping determines the amount of high fre-
quency content in the delayed and regenerated signals. Higher amounts
of damping will result in less high frequency information in the delayed
signal.