Rocktron Intellifex XL - Manual (Page 41)

38
After the altered parameter values have been stored into the selected preset number, the
Intellifex XL will display "COPY TITLE TOO?". This will only be displayed when storing
into a new preset number, and allows you copy the title from the original preset into the new
preset also, if desired. To copy the title from the original preset, press the STORE button a
third time and the display will again flash "STORED". Step 4
STORED
If it is not desired to copy the title of the original preset, simply turn the PRESET control to any
other preset or turn the FUNCTION SELECT control to any function to exit. The altered parameters
will still be stored into the new preset number.
If a preset with modified parameters is exited without completing the store procedure, all edited
parameter values will be lost and the preset will revert back to its original status the next time it is
recalled. When saving a preset’s altered parameters, make sure the display flashes "STORED" before
exiting the preset to ensure that it was indeed stored.
G
Note
!
Caution