ROHO SelectAir MA mattress - Manual (Page 9)

7
Important Safeguards
Please read and follow the instructions regarding SelectAir mattress and overlay systems
and retain this manual for future reference. Follow all warnings and instructions marked
on the control unit and mattress as well as those listed in this manual.
Note: DO NOT place liquids on top of the control unit.
Handling
Handle the control unit with care. Dropping it may cause internal damage and can cause
the control unit to malfunction.
Note: DO NOT use a control unit if it appears to be damaged. Consult an
authorized MOXI / SelectAir distributor.
Dust or Dirt
Keep the SelectAir control unit away from excessive dust or dirt, which can cause
premature failure. The control unit is supplied with a replaceable air filter that should
be replaced every 90 days under normal conditions. The air filter should be inspected
and cleaned every month under normal conditions, and more frequently when used in
abnormally dusty or dirty environments.
Cleaning
Unplug the control unit from the wall outlet before cleaning. Do not use harsh liquid
chemicals, cleaning solvents or aerosol cleaners. Water and a mild dish washing
detergent may be used on a soft, damp cloth or paper towel. Please refer to Section 8.
Accessories
Do not place the control unit on an unstable surface because it may fall, causing severe
damage to the control unit. Use only manufacturer-recommended accessories. Any
mounting of the control unit must follow the manufacturer?s instructions. The hospital
bed footboard must be able to support the control unit and any additional weight.
Heat and Ventilation
Refer to page 2 of this manual for operating and storage limits. It is important that
this opening is not blocked or covered during operation. The control unit should not
be placed in a built-in installation, such as a closet or rack unless proper ventilation is
provided.
Power Sources
The control unit should only be operated from an appropriate AC outlet capable of safely
delivering at least three (3) amps of electrical current. If you are not sure of the type of
power supply available, consult your MOXI / SelectAir distributor or a certified electrician.
Object Entry and Excess Weight
Never push objects of any kind into this product. Excess weight placed on the control unit
can cause damage to the housing.
Grounded Power Cord and Plug
This control unit is equipped with a grounded power cord. The plug will fit into the power
outlet only one way. If you are unable to insert the plug fully into the outlet, contact your
Section 4 Important Safeguards