Summit Audio ECS-410 Everest Channel Strip - Manual (Page 15)

15 ECS-410 EVEREST
TouchPatch™ Routing System
TouchPatch™ Routing System
Unique to the ECS-410, the TouchPatch™ routing allows you to
route any section to and from any other section with a touch of a
single button. TouchPatch controls what is feeding DriveBus and
anything not routed is available to be used individually from the
back panel.
The first row of five buttons include the Mz2 Preamplifier as the
first processor in the chain. (The Db2 DriveBus is always last.)
The second row of four buttons have all the remaining effects
combinations but without the Mz2 Preamplifier.
The No Route button turns off all routing to the DriveBus, allowing
you to use each processor separately.
No Route
Pre-DriveBus
Pre-Dyn-DriveBus
Pre-EQ-DriveBus
Pre-Dyn-EQ-DriveBus
Pre-EQ-Dyn-DriveBus
Mz2
Preamp
Dyn-DriveBus
EQ-DriveBus
Dyn-EQ-DriveBus
EQ-Dyn-DriveBus
No Mx2
Preamp
TouchPatch
Bypass
g TouchPatch makes setup
and experimentation a breeze
since all the patching is auto-
matic.
In addition, the audio signals
remain on the circuit board
without being routed through
noisy connectors and switches.