Summit Audio ECS-410 Everest Channel Strip - Manual (Page 49)

49 ECS-410 EVEREST
Specifications
Fe-1 Passive 3 Band Equalizer
THD+N: (@+4dB) (no cut or boost) 0.009% (A-weighted),
0.025% (unweighted)
Freq. Response: 5Hz-100kHz +/- 0.5dB; 5Hz-200kHz +/- 2dB
Frequencies: Low: 33, 60, 100, 150, 270, 390 Hz (peak or shelf)
Mid: 560, 630, 1K, 1.6K, 2.5K, 3.3K Hz
High: 5K, 7.2K, 8.2K, 10K, 12.5K, 16K Hz
(peak or shelf)
Cut/Boost: +/- 12dB per band
Low Shelf: 6dB/8va, peaking bandwidth 2 octaves
Mid Peaking BW: 2 octaves
High Shelf:
6dB/8va, peaking bandwidth 2 octaves
I/O: Balanced XLR, +4dBu, in and out
Dc1 - Dual Mode Compressor
THD+N: (@+4dB) (no compression, but through gain cell)
0.025% (A-weighted), 0.041% (unweighted)
(with 6dB compression)
0.013% (A-weighted), 0.022% (unweighted)
Freq. Response: 5Hz-200kHz +/- 2dB; 5Hz-136kHz +/- 0.5dB
Gain: -4dB to 10dB
Attack: Variable from 4mS to 100mS
Release: Variable from 50mS to 1S
Ratio: Classic: 3:1, Tight: 10:1
(approximate, program dependent)
Metering: 10 segment LED for gain reduction
I/O: Balanced XLR, +4dBu in and out, 1/4” side chain
jack, 1/4” stereo link jack