Summit Audio ECS-410 Everest Channel Strip - Manual (Page 39)

39 ECS-410 EVEREST
Tips and Tricks
Add Tube or Discrete Transistor Distortion to a
Track during Tracking or Mixing
TouchPatch No Route (no internal routing to the DriveBus)
Connections
Run the signal into the DriveBus input. 1.
DriveBus output back into the recording or live sound system. 2.
DriveBus
M
ode
: Tube or Solid State
d
riVe
: 10
o
utPut
: Set to proper level.
Adjust Drive and Output controls for the right
amount of distortion.
Need More Distortion?
Use the Dynamics section to add more gain.
TouchPatch Dyn-DriveBus
Connections
Run a signal into the Dynamics input; signal out of the DriveBus
Dynamics
t
HresHold
: High, so NO compression on meter
G
ain
: Add gain to the DriveBus, all the way to complete
distortion.