Summit Audio ECS-410 Everest Channel Strip - Manual (Page 25)

25 ECS-410 EVEREST
Db2 - Drive Bus Master Output and Drive Section
Db2 - Drive Bus Master Output and
Drive Section
The Db2 output section contains multiple gain stages for over-
driving the vacuum tube or discrete transistor amplifiers. The Drive
and Output controls make it easy to dial-in the desired sound at
any output level.
Saturation: • Turn up the Master Output about halfway,
then adjust the Drive for the desired tone. Adjust the Master
Output level as needed.
Clean:
• Turn up the Master Output Level to 10, then turn up
the Drive amount to set the output level
Drive Control
This small knob controls the signal amount into the tube or solid-
state amplifier. Turn up the Drive control past 5 to increase satura-
tion and add tone. The Drive LED illuminates to show the over-
drive amount.
Drive
Amount
Output
VU Meter
Master
Output
Level
Tube,
Solid-State,
or Bypass
Select
Bus Overload
LED
Drive
LED