Summit Audio ECS-410 Everest Channel Strip - Manual (Page 24)

24 Summit Audio, Inc.
Fe1- Passive Three Band Equalizer
High Band
The High EQ band can be set for either a peak or shelving
response and can boost or cut by up to ±12dB. The center point
of the filter band can be set to any of six frequencies:
5 kHz, 7.2 kHz, 8.2 kHz, 10 kHz, 12 kHz, and 18 kHz.
Peak or Shelving Response
The Low and High EQ bands can be set for either peak or
shelving response. In shelf mode, for example, the High band
continues to boost or cut frequencies above the center frequency.
In peak mode the High band creates a bell-shaped response
curve.
Bypass Switch
In Bypass mode the Fe1 is switched completely out of the signal
path whether patched via TouchPatch or the direct I/O.
TouchPatch Indicator
This LED lights to indicate that the Equalizer section is routed to
the internal DriveBus.
Outputs of any section are always active, even if routed via Touch-
Patch. If not routed via TouchPatch inputs as well as outputs are
active.