Taser X26 - Manual (Page 10)

10 TASER® CDPM Operating Manual • MMU0014 Rev: B
9. Next, select the second number of the 5-digit code.
9.a. Press the Illumination Selector until the desired number for the second
activation code digit is displayed on the right side of the CID.
9.b. Pull the trigger switch. The system will enter that number. A number “3”
should then display on the left side of the CID (as seen in Figure 9).
9.c. Press the Illumination Selector until the desired number for the third
activation code digit is displayed on the right side of the CID.
9.d. Pull the trigger switch. The system will select that number.
A number “4” should then display on the left side of the CID
(as seen in Figure 10).
9.e. Press the Illumination Selector until the desired number for the
fourth activation code digit is displayed on the right side of the CID.
Figure 10
Figure 9