Taser X26 - Manual (Page 19)

TASER® CDPM Operating Manual • MMU0014 Rev: B 19
CID DISPLAY EXPLANATIONS
EO: This error code is displayed when you attempt to load the Configuration CDPM (CCDPM) into
the TASER X26 device Citizen model (X26C).
E1: This error code is displayed if a Version 21 or earlier DPM is inserted in an X26 Device
after it has been configured/de-configured with the CCDPM/DCDPM without first having
finished the configuration/de-configuration process by inserting a version 22 DPM for
software programming. This error may be fixed by simply inserting a version 22 or greater
DPM/CDPM into the X26 device for the completion of the configuration process.
EE: This error code is displayed when an internal error is detected. This may be caused by either
problems within the CDPM or the X26 device. Call TASER customer service at 1-800-978-2737.
AC: Blinking indicates that an activation code is required for entry in order for a CDPM
configured X26 device to operate. Non Blinking indicates that the 5-digit activation code
has been accepted and validated.