Taser X26 - Manual (Page 5)

TASER® CDPM Operating Manual • MMU0014 Rev: B 5
The CDPM is designed to work with law enforcement X26 devices. It can be used with the X26
Citizen device (X26C™); however, the activation code feature will not function.
An X26 device, configured for a CDPM, operates the same way as other X26 devices
with one major difference: if the device detects that either the CDPM or the lanyard/
wrist strap (Figure 1) has been removed or disconnected for more than two seconds,
then you must enter an activation code for the device to work.
In addition to the CDPM, the CDPM configuration system includes two specialized
DPMs (Figures 2 and 3); a green Configure Controlled DPM (CCDPM™) and a red
De-Configure Controlled DPM (DCDPM™). The CCDPM is used
to activate a code enabled profile in the X26 device. In the code
enable mode, the X26 device will work with all TASER digital power
magazines. The DCDPM will convert a code enabled X26 device
back to its original configuration, whereby an activation code is not
required.
Figure 1
Figure 2 Figure 3