Taser X26 - Manual (Page 8)

8 TASER® CDPM Operating Manual • MMU0014 Rev: B
6. Place the safety switch in the up (ARMED) position. The CID blinks a two-digit number. The left-
side digit identifies the index of the 5-digit code (“1” represents the first digit of the code, “2” the
second digit, etc). The right-side digit represents your programmed number for the activation.
When no code has been entered, the right-side digit is zero, see below:
In the example below, the code “2-4-6-8-9” has been set. “2” is the first number of the code, “4”
is the second, “6” is the third, and so on. The highlighted numbers below represent the
programmed activation code.