Xblue Networks X16 - Manual (Page 45)

Issue 2 - 45 -
Ph
on
e
Se
tu
p
Feature Button Programming
Step 1 – Press the program button
Step 2 – Select phone setup
Step 3 – Press the select (center) navigation key
Step 4 – Press the down navigation key and select “Feature Key”
Step 5 – Press the center navigation button to begin
Step 6 – Press the up or down navigation key to select the feature
button to be programmed or press the feature key to be
programmed.
The display will show the selected FTR button. The display below shows
FTR#01, FTR button 1, was pressed.
Step 7 – Press the Program button to exit programming and not modify
the current button programming or press the center button to change
the current setting.
Step 8 – Using the up or down navigation key, select between DSS/BLF,
Speed Key, or Feature.
Step 9 – Press the select button to display the current programmed
function.
Step 10 – Enter the appropriate extension, speed dial number or use the
up or down navigation keys and select the desired feature.
Step 11 – Press the select button to confirm the selection.
AUTO MUTE Select FTR Key
AUTO MUTE FTR#01:DSS/BLF
=301
AUTO MUTE FTR#01
=DSS/BLF Key