Xblue Networks X16 - Manual (Page 47)

Issue 2 - 47 -
Sy
st
em
S
et
up
System Setup
When System Setup is selected, the password will need to be
entered. At default, the password is ####.
The default system password is  , and can
be changed to any 4 digit number.
To set the system date and time:
Enter the Year in two digit year and then press
the center navigation button. Enter the month
and the day in four digit format and then press
the center navigation button. Enter the hour
and the minutes in 12 hour format, and then
press the center navigation button. Press the up
navigation button for P (PM) and the down
navigation button for A (AM). Note: Caller ID
will maintain the time and date after it is set the
first time.
Recall time – When a call is placed on hold, this
timer begins. When this timer expires, the call
placed on hold, will begin ringing all extensions
in the system. Using the up or down navigation
key, the timer can be adjustable from 00, 30,
45, 60, 90, and 120 seconds.
Tone/Pulse – This allows the system to be used
on older network (Telephone Company) Lines.
DTMF (Touch Tone) Tones are used on most
network (Telephone Company) lines.
Flash – The Flash, which is a momentary
closure, is a rudimentary indication to the
telephone company line that a feature is being
enabled, such as call waiting. This timer is
adjustable from 80 to 800 milliseconds.
AUTO MUTE Change Password
AUTO MUTE Date & Time
AUTO MUTE Recall Time
=30 Seconds
AUTO MUTE Tone/Pulse
=Tone
AUTO MUTE Flash Time
=600 ms