Pilz PSSu H PLC1 FS SN SD - Manual (Page 14)

4.1 Configuration in a graphics software package
4 Configure PSS 4000 Diag Control
Pilz GmbH & Co. KG, Felix-Wankel-Straße 2, 73760 Ostfildern, Germany
Telephone: +49 711 3409-0, Telefax: +49 711 3409-133, E-Mail: [email protected]
4-2
4.1.1 General tab
General tab 4- PSS 4000 Diag Control General
Fig. 4-1: General tab
On the General tab you can make the following settings:
 OPC server address
Enter the IP address or the logical name of the PSS 4000 OPC Serv-
er.
Default: "localhost"
"localhost" is the valid logical name when the PSS 4000 OPC Server
and the graphics software are on the same computer.