Configuration in a browser, General properties, 2 configuration in a browser – Pilz PSSu H PLC1 FS SN SD User Manual
Page 21: 1 general properties
Pilz GmbH & Co. KG, Felix-Wankel-Straße 2, 73760 Ostfildern, Germany
Telephone: +49 711 3409-0, Telefax: +49 711 3409-133, E-Mail: [email protected]
4-9
4.2
Configuration in a browser
4
Configure PSS 4000 Diag Control
4.2
Configuration in a browser
4200
Configuration in a browser
4-
PSS4000 Diag Control HTML
The section below describes how to configure PSS 4000 Diag Control in
an ActiveX-enabled browser. Configuration requires some knowledge of
the HTML markup language.
The Appendix contains examples that you can use to create your own
HTML file.
General browser display settings:
<body scroll=no>
Switches off Internet Explorer's vertical scroll bar.
WIDTH=a; HEIGHT=b
Size of the window in which the PSS 4000 Diag Control is displayed,
in pixels.
style="margin-left:-2px; margin-top:-2px;"
Aligned left, -2 pixels from left margin and -2 pixels from top margin
for better presentation
CLASSID="CLSID:CE42D3A2-5C9C-4A77-B7DF-08A27AAC7BC5"
Class-ID used to reference the PSS 4000 Diag Control.
4.2.1
General properties
General properties
4-
PSS4000 Diag Control Allgemeine Properties konfigurieren
General properties of PSS 4000 Diag Control:
"OPCServer"
The IP address or logical name of the PSS 4000 OPC Server. "local-
host" is the valid logical name when the PSS 4000 OPC Server and
PSS 4000 Diag Control are on the same computer.
"Language"
To display the diagnostic texts in the required language, enter the
LCID for the relevant language.
– Values:
– English: "1033"
– German: "1031"
"Display"
Window format
– Values:
– "SingleWindow"
– "SplitWindow"
"QVGA"
Screen output optimised for QVGA format
– "0" = not activated
– "1" = activated (only when Single Window is selected)