Pilz PDP67 F 4 code - Manual (Page 15)

Pilz GmbH & Co. KG, Felix-Wankel-Straße 2, 73760 Ostfildern, Germany
Telephone: +49 711 3409-0, Telefax: +49 711 3409-133, E-Mail: [email protected]
5-1
5.1 General installation guidelines
5 Installation
55000 Installation Installation 5- 5.1 General installation guidelines 5100 General installation guidelines 5- Montagefläche_PDP
The product must be fastened to a flat mounting surface, so that there
is no strain on the housing when the module is screwed down. The
mounting distances will depend on which plug-in connectors are used
and on the bending radius of the cables.
Unused connectors should be sealed using blind plugs.
Montage_PDP - Vorgehensweise
To install the system, proceed as follows:
 Fit 2 x M4 internal threads on the mounting surface.
 Use two fixing screws to attach the product to the mounting plate.
5.1.1 Dimensions
Dimensions 5- Abmessungen_PDP
60
4,3
123 133
4,3
22,1
5,6