Altera MAX 10 Embedded Multipliers - Manual (Page 10)

Embedded Multipliers Implementation Guides
3
2014.09.22
UG-M10DSP Subscribe
Send Feedback
The Quartus II software contains tools for you to create and compile your design, and configure your
device.
You can prepare for device migration, set pin assignments, define placement restrictions, setup timing
constraints, and customize IP cores using the Quartus II software.
Embedded Multipliers Implementation Guides
The Quartus II software contains tools for you to create and compile your design, and configure your
device.
You can prepare for device migration, set pin assignments, define placement restrictions, setup timing
constraints, and customize IP cores using the Quartus II software.
IP Catalog and Parameter Editor
The Quartus II IP Catalog (Tools > IP Catalog) and parameter editor help you easily customize and
integrate IP cores into your project. You can use the IP Catalog and parameter editor to select, customize,
and generate files representing your custom IP variation.
The IP Catalog automatically displays the IP cores available for your target device. Double-click any IP
core name to launch the parameter editor and generate files representing your IP variation. The
parameter editor prompts you to specify your IP variation name, optional ports, architecture features, and
output file generation options. The parameter editor generates a top-level .qsys or .qip file representing the
IP core in your project. Alternatively, you can define an IP variation without an open Quartus II project.
When no project is open, select the Device Family directly in IP Catalog to filter IP cores by device.
Note: The IP Catalog is also available in Qsys (View > IP Catalog). The Qsys IP Catalog includes
exclusive system interconnect, video and image processing, and other system-level IP that are not
available in the Quartus II IP Catalog.
Use the following features to help you quickly locate and select an IP core:
© 2014 Altera Corporation. All rights reserved. ALTERA, ARRIA, CYCLONE, ENPIRION, MAX, MEGACORE, NIOS, QUARTUS and STRATIX words and logos are
trademarks of Altera Corporation and registered in the U.S. Patent and Trademark Office and in other countries. All other words and logos identified as
trademarks or service marks are the property of their respective holders as described at www.altera.com/common/legal.html . Altera warrants performance
of its semiconductor products to current specifications in accordance with Altera's standard warranty, but reserves the right to make changes to any
products and services at any time without notice. Altera assumes no responsibility or liability arising out of the application or use of any information,
product, or service described herein except as expressly agreed to in writing by Altera. Altera customers are advised to obtain the latest version of device
specifications before relying on any published information and before placing orders for products or services.
ISO
9001:2008
Registered
www.altera.com
101 Innovation Drive, San Jose, CA 95134