Altera Arria II GX FPGA - Manual (Page 18)

4–4 Chapter 4: Development Board Setup
Factory Default Switch Settings
Arria II GX FPGA Development Kit, 6G Edition User Guide July 2010 Altera Corporation
f For more information about the FPGA board settings, refer to the Arria II GX FPGA
Development Board, 6G Edition Reference Manual .
J9 pins 5-6 HSMB DIS
This jumper has the following options:
■ Installing the shunt removes HSMC port B from the JTAG chain.
■ Removing the shunt includes HSMC port B in the JTAG chain.
Installed
J9 pins 7-8 PCIe DIS
This jumper has the following options:
■ Installing the shunt removes the PCIe device from the JTAG chain.
■ Removing the shunt includes the PCIe device in the JTAG chain.
Installed
Table 4–3. JTAG Chain Jumper Settings (Part 2 of 2)
Board
Reference
Board
Label
Function
Default
Shunt Position