User leds, Push button switches, The sram&flash tab – Altera Arria II GX FPGA User Manual
Page 28: User leds –8 push button switches –8, The sram&flash tab –8
Advertising
6–8
Chapter 6: Board Test System
Using the Board Test System
Arria II GX FPGA Development Kit, 6G Edition User Guide
July 2010
Altera Corporation
User LEDs
The User LEDs control displays the current state of the user LEDs. Click the graphical
representation of the LEDs to turn the board LEDs on and off.
Push Button Switches
The read-only Push button switches control displays the current state of the board
user push buttons. Press a push button on the board to see the graphical display
change accordingly.
The SRAM&Flash Tab
The SRAM&Flash tab allows you to read and write SRAM and flash memory on your
board.
shows the SRAM&Flash tab.
The following sections describe the controls on the SRAM&Flash tab.
Figure 6–4. The SRAM&Flash Tab
Advertising