Bitstream compatibility check – Altera Partial Reconfiguration IP Core User Manual
Page 5
7. Click Exit.
Related Information
•
Instantiating the Partial Reconfiguration IP Core in the Qsys Interface
•
Partial Reconfiguration IP Core Parameters
Bitstream Compatibility Check
Turn on the Enable bitstream compatibility check when instantiaing the PR IP core from either Qsys or
the IP Catalog to have the Quartus II software verify the partial reconfiguration PR Bitstream file (
.rbf
). If
an incompatible bitstream is detected, the PR operation aborts and the
status
output reports an error.
Static Region
PR Region
Persona A
PR Bitstream
Persona B
from Same
Design
PR Bitstream
Persona B
from Different
Design
Incompatible PRPOF
(Will Corrupt the design
and May Damage Device)
Compatible
PR Bitstream (.rbf)
This prevents you from accidentally corrupting the static region of your design with a bitstream from an
incompatible
.rbf
and risking damage to the chip being programmed.
UG-PARTRECON
2015.05.04
Bitstream Compatibility Check
5
Partial Reconfiguration IP Core
Altera Corporation