Altera Stratix III - Manual (Page 30)

A–4 Appendix A: Programming the Flash Device
Programming the Flash Device
Stratix III Development Kit User Guide © August 2008 Altera Corporation
9. Click Auto Detect. The EP3SL150 device and a child CFI_512MB device appear in
the list of devices to be programmed.
10. Double-click the <File><none> field of the CFI_512MB row. The Select New
Programming File dialog box appears. Select the desired .pof, in this example the
<output_file>.pof flash file you created earlier, and click Open.
11. Turn on Page_0 and OPTION_BITS options in the Program/Configure column
that correspond to the CFI_512MB device ( Figure A–3 ). This results in writes only
to the flash page zero and the option bit register.
Figure A–2. PFL Programming