Demonstration application description, Analog settings, Demonstration application description –3 – Altera Transceiver Signal Integrity User Manual
Page 21: Analog settings –3, Figure 6–1
Chapter 6: Stratix IV GX Transceiver Signal Integrity Demonstration
6–3
Running the Demonstration Application and Test Designs
December 2011
Altera Corporation
Transceiver Signal Integrity Development Kit,
Stratix IV GX Edition User Guide
Demonstration Application Description
The demonstration application provides an easy-to-use interface (
change transceiver parameters and observe the performance. You can customize your
board design by choosing transceiver settings from the categories described in this
section.
Analog Settings
You can use the application to dynamically control transceiver PMA settings for the
different transceiver blocks. Select the VCCHTX value based on the jumper (J11)
settings. Similarly, ensure that the VCCA_L/R supply jumper (J6) is connected
according the settings shown in
.
Figure 6–1. Demonstration Application Control Panel Window