Driving and parking, Driving systems – Mercedes-Benz 2013 C Class Sedan User Manual

Page 172

Advertising
background image

shown in the multifunction display. If the
vehicle in front is no longer detected and
displayed, DISTRONIC PLUS switches off and
a tone sounds.

X

Briefly pull the cruise control lever towards
you ?, or press it up : or down ;.
DISTRONIC PLUS is selected.

X

Press the cruise control lever repeatedly
up : or down ; until the desired speed
is set.

X

Remove your foot from the accelerator
pedal.
Your vehicle adapts its speed to that of the
vehicle in front, but only up to the desired
stored speed.

i

If you do not fully release the accelerator

pedal, the

DISTRONIC PLUS Override

message appears in the multifunction
display. The set distance to a slower-
moving vehicle in front will then not be
maintained. You will be driving at the speed
you determine by the position of the
accelerator pedal.

Activating when driving towards a

stationary vehicle
If the vehicle in front of you is stationary, you
can only activate DISTRONIC PLUS once your
vehicle is stationary as well.

X

Briefly pull the cruise control lever towards
you ?, or press it up : or down ;.
DISTRONIC PLUS is selected.

i

DISTRONIC PLUS can only be activated at

under 20 mph (30 km/h) if a vehicle in front
has been detected. Therefore, the
DISTRONIC PLUS distance display in the
instrument cluster should be activated
(

Y

page 206).

X

Press the cruise control lever repeatedly
up : or down ; until the desired speed
is set.

i

You can use the cruise control lever to set

the stored speed and the control on the

cruise control lever to set the specified
minimum distance (

Y

page 172).

Pulling away

X

If the vehicle in front pulls away: remove

your foot from the brake pedal.

X

Briefly pull the cruise control lever towards
you ?.

or

X

Accelerate briefly.
Your vehicle pulls away and adapts its
speed to that of the vehicle in front.

Driving
If there is no vehicle in front, DISTRONIC
PLUS operates in the same way as cruise
control.
If DISTRONIC PLUS detects that the vehicle
in front has slowed down, it brakes your
vehicle. In this way, the distance you have
selected is maintained.
If DISTRONIC PLUS detects that the vehicle
in front is driving faster, it accelerates your
vehicle, but only up to the speed you have
stored.

Changing lanes
If you change to the passing lane, DISTRONIC
PLUS supports you when:

R

you are driving faster than 40 mph
(60 km/h)

R

DISTRONIC PLUS is maintaining the
distance to a vehicle in front

R

you switch on the appropriate turn signal

R

DISTRONIC PLUS does not detect a danger
of collision

If these conditions are fulfilled, your vehicle
is accelerated. Acceleration will be
interrupted if changing lanes takes too long
or if the distance between your vehicle and
the vehicle in front becomes too small.

i

When changing lanes, DISTRONIC PLUS

monitors the left lane on left-hand drive
vehicles and the right lane on right-hand
drive vehicles.

170

Driving systems

Driving and parking

Advertising