On-board computer and displays, Display messages – Mercedes-Benz 2013 C Class Sedan User Manual

Page 222

Advertising
background image

Display messages

Possible causes/consequences and M Solutions

PRE-SAFE
Functions

Currently Limited

See Operator's

Manual

PRE-SAFE

®

Brake is temporarily inoperative. Possible causes are:

R

function is impaired due to heavy rain or snow.

R

the sensors in the radiator grill and the bumper are dirty.

R

the radar sensor system is temporarily inoperative, e.g. due to
electromagnetic radiation emitted by nearby TV or radio
stations or other sources of electromagnetic radiation.

R

AMG vehicles: ESP

®

is deactivated.

R

the system is outside the operating temperature range.

R

the on-board voltage is too low.

When the causes stated above no longer apply, the display
message disappears.
PRE-SAFE

®

Brake is operational again.

If the display message does not disappear:

X

Pull over and stop the vehicle safely as soon as possible, paying
attention to road and traffic conditions.

X

Secure the vehicle against rolling away (

Y

page 158).

X

Clean the sensors in the radiator grill and the bumper
(

Y

page 291).

X

Restart the engine.

X

AMG vehicles: reactivate ESP

®

(

Y

page 68).

PRE-SAFE
Functions Limited

See Operator's

Manual

PRE-SAFE

®

Brake is inoperative due to a malfunction. BAS PLUS

or the distance warning signal may also have failed.

X

Visit a qualified specialist workshop.

6

SRS Malfunction

Service Required

There is a malfunction in the SRS (Supplemental Restraint
System). The 6 warning lamp also lights up in the instrument
cluster.

G

WARNING

The air bags or Emergency Tensioning Devices may either be
triggered unintentionally or, in the event of an accident, may not
be triggered.
There is an increased risk of injury.

X

Visit a qualified specialist workshop.

For further information about SRS, see (

Y

page 41).

220

Display messages

On-board computer and displays

Advertising