Windscreen wipers, Switching the windscreen wipers on/off, Lights and windscreen wipers – Mercedes-Benz 2012 A Class User Manual

Page 119

Advertising
background image

X

Insert the new bulb into the bulb holder and
turn it clockwise.

X

Secure the bulb holder to attachments =
on the lamp cluster and tighten plastic
nuts ?.

X

Insert the lamp cluster into the vehicle and
make sure that it sits correctly in guides
F.

X

Tighten wing nut ; and re-establish con-
tact with connector :.

X

Close the side trim panel (

Y

page 115).

Windscreen wipers

Switching the windscreen wipers on/

off

!

Do not operate the windscreen wipers

when the windscreen is dry, as this could
damage the wiper blades. Moreover, dust
that has collected on the windscreen can
scratch the glass if wiping takes place when
the windscreen is dry.
If it is necessary to switch on the wind-
screen wipers in dry weather conditions,
always operate them using washer fluid.

!

If the windscreen wipers leave smears on

the windscreen after the vehicle has been
washed in an automatic car wash, this may
be due to wax or other residue. Clean the
windscreen with washer fluid after an auto-
matic car wash.

Combination switch
1

$ Windscreen wipers off

2

Ä Intermittent wipe, low (rain sensor
set to low sensitivity)

3

Å Intermittent wipe, high (rain sensor
set to high sensitivity)

4

° Continuous wipe, slow

5

¯ Continuous wipe, fast

B

í Single wipe/î to wipe the wind-
screen using washer fluid

X

Turn the key to position

1 or 2 in the ignition

lock.

X

Turn the combination switch to the corre-
sponding position.

!

Vehicles with a rain sensor: if the wind-

screen becomes dirty in dry weather con-
ditions, the windscreen wipers may be acti-
vated inadvertently. This could damage the
windscreen wiper blades or scratch the
windscreen.
For this reason, you should always switch
off the windscreen wipers in dry weather.

Vehicles with a rain sensor: in the Ä or
Å position, the appropriate wiping fre-
quency is automatically set according to the
intensity of the rain. In the Å position, the
rain sensor is more sensitive than in
the Ä position, causing the windscreen
wipers to wipe more frequently.
If the wiper blades are worn, the windscreen
will no longer be wiped properly. This could
prevent you from observing the traffic condi-
tions. Replace the wiper blades twice a year,
ideally in spring and autumn.

Windscreen wipers

117

Lights and windscreen wipers

Z

Advertising