Driving and parking, Automatic transmission – Mercedes-Benz 2012 A Class User Manual

Page 154

Advertising
background image

j

Park position with parking lock

k

Reverse gear

i

Neutral

h

Drive

i

The DIRECT SELECT lever always returns

to its original position. The current trans-
mission position

P, R, N or D appears in the

transmission position display
(

Y

page 152) in the multifunction display.

Transmission position and drive pro-

gram display

The current transmission position and drive
program appear in the multifunction display.

:

Transmission position display

;

Drive program display

i

The arrows in the transmission position

display show how and into which transmis-
sion positions you can change using the
DIRECT SELECT lever.

!

If the transmission position display in the

multifunction display is not working, you
should pull away carefully to check whether
the desired transmission position is
engaged. Ideally, you should select trans-
mission position

D and drive program E or

S.

Engaging park position P

X

Push the DIRECT SELECT lever in the direc-
tion of arrow

P.

Transmission position display

P is shown in

the multifunction display.

i

When you engage park position

P, make

sure that the transmission position display
shows

P in the multifunction display.

i

You can only engage park position

P when

the vehicle is stationary.

i

The automatic transmission shifts into

park position

P automatically:

R

if you open the driver's door while the
vehicle is stationary in transmission posi-
tion

D or R

R

if you open the door while travelling at
very low speeds in transmission position
D or R

In addition, a warning tone sounds and a
display message is shown.

i

Depressing the brake and pushing the

DIRECT SELECT lever up or down disen-
gages the parking lock. The transmission is
in

N neutral.

At transmission fluid temperatures below
Ò20 †, you can only shift out of park posi-
tion

P into another transmission position

when the engine is running.
In order to shift from park position

P

directly into

R or D:

R

depress the brake pedal and

R

push the DIRECT SELECT lever up or
down past the first point of resistance

!

If the engine speed is too high, do not shift

the automatic transmission directly from
D to R, from R to D or directly to P. Other-

wise, the automatic transmission could be
damaged.

152

Automatic transmission

Driving and parking

Advertising